bác vunhat cứu em với
em có chú tự động báo lỗi E18
chỉ xem được ảnh
không chụp được
không thụt được ống kính vào
trên
http://www.e18error.com/repair.html nó dậy thế này nhưng em chưa dám làm
Before trying any of the suggestions, make sure your Canon has fresh batteries and it is in recording mode.
1) Remove the batteries from the camera, wait for a couple of minutes, then put them back in and turn the camera on.
2) Try compressed air. With a fine tip blow off gun and dry compressed air (20 lbs) set the tip between the lens turret and the camera body and turn on the air while moving the tip around the lens. It should remove all dust and sand. Turn the camera on and it should function fine.
3) Another method is to tap the padded USB cover part on a hard surface, for example, a desk. It sounds so simple, but very often in works.
4) Try forcing the camera lens: