không hiểu nhiều vấn đề này lắm
Connect the ballast to the underside of the light as shown. You must first attach the harness back onto the light before putting the ballast on. The picture doesn't show this, but you will see what I am talking about. The picture also shows how the wires are run with the cover over the HID opening.
Place the included black connectors onto the Halo wire ends. Insert the wires with the metal tab UP into the opening the black connector. (You will see how it fits.) The wires have no polarity, so it shouldn't matter which side you connect them into. Connect the black connectors together and then connect the ballasts to the power supplies. You have male/female plugs for these and it should be fairly easy to see how they fit together. Connect everything like you did when you tested the bulbs.
hinh anh lon dep ,
hinh anh lon dep nhat 2014
You did test the bulbs, right?