[Thảo luận] Nhờ các bác chỉ dẫn cách Reset bảo dưỡng E90

[nhphuc7610]

Xe em vừa hết bảo hành của EA, em muốn tự thay dầu máy các bác ạ, Có bác nào biết cách Reset lại đồng hồ báo bảo dưỡng thì chỉ em với nhé!

 

[saovietauto]

Này thì Reset:
Note: First carry out the service measure.
Resetting of a service job must always be carried out after the service measure has been completed.

Note: Perform reset according to instructions.
The resetting procedure is aborted by a timeout or a terminal change.

The service jobs can be reset in the car at the instrument cluster. Here, the availability of a service job is set to 100 % again (corresponding to a new part).
The availability is an internal computing value (not visible to the user).
Observe the following procedure when resetting with the trip odometer reset button:


Switch on terminal 15 (if equipped with 'Keyless Start' insert remote in ignition slot but do not start engine).
Press the trip odometer reset button for approx. 10 seconds until the 1st service job appears in the LC display.
The upper display in the speedometer is illuminated by a service symbol (e.g.: an oil can denotes an oil change).
The lower display in the speedometer indicates the time or distance remaining until the next service (e.g.: 14000).

Set desired maintenance scope with the rocker switch on the direction indicator/main-beam switch.



To reset, press the on-board computer button on the direction indicator/main-beam switch until the message "RESET" appears.
Resetting is confirmed by pressing the on-board computer button for a slightly longer period.
A clock is displayed during resetting.
A check/tick is displayed after "RESET" on successful resetting.
Repeat the procedure for each additional service which is to be reset.

 

[Bim318]

Này thì Reset:
Note: First carry out the service measure.
Resetting of a service job must always be carried out after the service measure has been completed.

Note: Perform reset according to instructions.
The resetting procedure is aborted by a timeout or a terminal change.

The service jobs can be reset in the car at the instrument cluster. Here, the availability of a service job is set to 100 % again (corresponding to a new part).
The availability is an internal computing value (not visible to the user).
Observe the following procedure when resetting with the trip odometer reset button:


Switch on terminal 15 (if equipped with 'Keyless Start' insert remote in ignition slot but do not start engine).
Press the trip odometer reset button for approx. 10 seconds until the 1st service job appears in the LC display.
The upper display in the speedometer is illuminated by a service symbol (e.g.: an oil can denotes an oil change).
The lower display in the speedometer indicates the time or distance remaining until the next service (e.g.: 14000).

Set desired maintenance scope with the rocker switch on the direction indicator/main-beam switch.



To reset, press the on-board computer button on the direction indicator/main-beam switch until the message "RESET" appears.
Resetting is confirmed by pressing the on-board computer button for a slightly longer period.
A clock is displayed during resetting.
A check/tick is displayed after "RESET" on successful resetting.
Repeat the procedure for each additional service which is to be reset.

He He, ý bác SaoViet muốn nói là mang xe đến Saoviet các bác ý reset cho ấy mà :21::21::21::21::21: